China printed fabric supplier explain common printing fabric technology

China printed fabric supplier says with the development of science and technology, the textile industry is also making progress.

On weekdays, bright clothes and various patterns are the progress and development of printing technology. Speaking of printing technology, how many do you know?

China printed fabric supplier talk about glue printing process

China printed fabric supplier says The gel printing process uses special chemical gels to seamlessly blend with dyes. The dye is firmly adhered to the fabric through the medium of the gel, and the paste printing process overcomes the limitations of the water paste printing.

The utility model is characterized by being suitable for printing of various color depths and materials.

It can be printed on blended fabrics of cotton, hemp, viscose, polyester, nylon, polypropylene, nylon and various fibers, as well as on materials such as leather and artificial leather.

China printed fabric supplier says It can be used for printing processes such as fluorescent printing, inkjet printing, rotten flower printing, electrostatic flocking printing, etc.

The biggest advantage of slurry printing process is that it is widely used, beautiful color and high degree of reduction, but its printing process is more complex and cost is relatively high compared with water slurry printing process.

Water slurry printing process

China printed fabric supplier says Water slurry printing process is one of the most basic printing processes in screen printing industry.

It can be printed on cotton, polyester, hemp and almost all light background fabrics, and is widely used.

China printed fabric supplier says Its working principle is similar to dyeing, but the difference is that it “dyes” a certain area of the fabric into the color required by the flower position.

Therefore, this process can not be applied to dark background fabrics.

China printed fabric supplier says The biggest advantage of water slurry printing process is that it is widely used, has good flower position fastness, and can print better results at a relatively low price.

China printed fabric supplier says The limitation of water slurry printing process is that it can not be applied to all dark fabrics.

Gold and silver stamping process

Gilding and silver stamping is a traditional means of binding and beautification, which is often used in many paper packages, while silk screen gilding and silver stamping is a new process.

China printed fabric supplier says Its principle is to add special chemicals to the printing pulp to make the flower position show particularly beautiful gold and silver, and the color sample is durable and does not fade.

China printed fabric supplier says It can be printed on many kinds of fabrics, and the cost ratio is lower than that of the traditional process, It is a very ideal printing decoration process.

Foaming printing process

China printed fabric supplier says Foaming printing is also called three-dimensional printing. The foaming printing process is developed on the basis of slurry printing process.

Its principle is to add several chemicals with high expansion coefficient in a certain proportion to the slurry printing dye, and foam the printing position at a high temperature of 200 ~ 300 degrees after drying, so as to achieve a three-dimensional effect similar to “relief”, The foaming printing process can be done according to the requirements of the substrate.

China printed fabric supplier says The high, medium and low foaming effect is very eye-catching. The biggest advantage of foaming printing process is strong three-dimensional feeling, prominent and expansive printing surface.

It is widely used in cotton cloth, nylon cloth and other materials.

Water change printing process

Water change printing process is a new printing process. Using a variety of physical and photochemical principles, the product is produced by this process.

China printed fabric supplier says When the fabric enters the water, the raw materials and water on the fabric change instantaneously, showing a preset rich pattern.

When the water on the surface of the fabric evaporates, the original pattern appears again.

This process can be widely used in the printing design of beach pants, swimsuits, raincoats, umbrellas, large signboards, advertisements and other media to produce a series of changeable and amazing color changing products such as “magic color changing swimsuit”. It has an extremely broad market.

Flocking printing process

China printed fabric supplier says Electrostatic flocking printing is one of the three-dimensional printing processes.

China printed fabric supplier says The principle is to transfer the high-strength compound resin adhesive to the surface of the substrate with the screen containing the required flower position, and then charge the fiber wool through the high-voltage electrostatic field of hundreds of thousands of volts, so that the wool can “hit” the adhesive vertically and evenly, and “lay” a layer of wool on the surface of the fabric, and then cure at high temperature.

It is widely used in sofa fabrics, packaging boxes, shoe fabrics, decoration, toys, industrial electrical parts protection and so on.

The fluff is covered on the surface of the object, which is not limited by the shape and size of the plant.

The products printed by flocking process have strong cube feeling, bright color, soft hand feeling, no depilation and friction resistance.

Cotton cloth, silk hemp, leather, nylon cloth, all kinds of PVC, denim, rubber, sponge, metal, foam, plastic, resin and no cloth can be printed.

Fluorescent printing process

China printed fabric supplier says Fluorescent printing process is a new type of special printing process.

The principle is to use a special process to integrate the photoinduced light storage self luminous material into the fabric, and realize the automatic luminous function by absorbing all kinds of visible light. Its characteristic is that it can be recycled for unlimited times.