Satin fabric wholesaler:Satin is a fabric with complex weaving

Introduction to satin fabric

Satin fabric wholesaler said that the characteristic of satin weave is that the individual weave points on two adjacent warp or weft yarns are far apart, and all the individual weave points are distributed regularly and discontinuously.

Satin fabric wholesaler said that these single tissue points are evenly distributed and covered by the floating length of another system yarn on both sides, showing warp or weft floating lines on the fabric surface.

Therefore, the cloth surface is smooth, even, shiny and soft.

Satin can be divided into warp satin and weft satin. Tissue circulation is usually measured in pieces.

Satin fabric wholesaler said that if the number of tissue cycles is 5, it is called 5 satins, the warp effect on the fabric surface is called warp satin, and the weft effect is called weft satin.

The figure shows the organization of five weft Satin patterns, figure (a) shows the organization diagram, (b) shows the weft section diagram, and (c) shows the structure diagram.

Satin texture

In order to achieve the characteristics of satin fabric, the parameters of satin weave shall be:

1. The number of tissue cycles R ≥ 5 (except 6);

2. The flying number s of a single tissue point shall conform to the following relationship: 1 < s < R-1;

3. R and s are prime numbers (no common divisor).

Why does the flight number s have to be 1

Secondly, why can’t there be a common divisor between S and R? Because when there is a common divisor between S and R, there will be several interleaving points on some yarns and no interleaving points on others in a tissue cycle.

Satin fabric wholesaler said that therefore, the tissue cannot be formed. As shown in the figure, if r = 8 and SJ = 2, the second, fourth, sixth and eighth weft yarns are not interleaved with warp yarns and cannot form the tissue.

Again, why can’t satin weave cycle R be 6? The reason is that if 1 or 5 is selected as the flying number, the drawn tissue is twill tissue.

If 2, 3 and 4 are selected as flying numbers, they have a common divisor with 6, so the satin weave cycle cannot be 6.

Satin weave can also be expressed in fractions.

Satin fabric wholesaler said that the numerator represents the number of complete yarns r in a cycle of satin weave, and the denominator represents the flying number s of weave points.

For example, 8 pieces of 3 flying Satin can be written as 8 / 3 satin. 8 pieces of 5 flying Satin can be written into 8 / 5 satin.

Satin fabric features: satin fabric is a combed fabric with a density of 173 × 124cm.

In the manufacturing process, warp and weft are interwoven at least once every three yarns.

Satin fabric, also known as satin fabric, is named because of its good quality characteristics as a tribute to the royal family.

Because warp and weft are interlaced at least three yarns at a time, it can be seen that the fabric density of satin weave, so the fabric will be thicker.

At the same time, the cloth surface is also relatively smooth, delicate and shiny, but the product cost is high, so the price is relatively expensive.

Satin fabric features

The weaving process of satin fabric is complex.

Satin fabric wholesaler said that there is only one kind of warp and weft on the same clothing surface, which is covered with the clothing surface in the form of floating length.

The case where the warp floating length covers the surface is called warp satin, and the case where the weft floating length covers the surface is called weft satin.

Satin fabric wholesaler said that The longer floating thread makes the fabric surface have better luster and easy to reflect light, so the fabric of all cotton satin gives people a feeling of luster.

At the same time, satin fabric is more durable, will not become smaller after washing, and will not become larger after a long time.

Moreover, the surface of satin fabric is relatively cool, which is very suitable for summer.