Characteristics of various China brushed fabric products

This paper summarizes the characteristics of various China brushed fabric, puts forward the identification method of judging warp knitted and brushed fabrics, and introduces the weaving process of brushed warp knitted fabrics and the determination method of raw materials.

In view of the difficulty in analyzing the organizational structure and raw material varieties and specifications in process analysis, the process characteristics of China brushed fabric are summarized, in which the analysis method of brushed fabric comb structure and the calculation formula used to calculate the comb structure are put forward.

China brushed fabric is a main fabric in the domestic warp knitted fleece fabric market

Compared with other cashmere products, China brushed fabric has the characteristics of fine, soft, non depilation, compact and stable fabric structure, so it is widely used in coats, blankets, plush toys and so on.

Because the surface of China brushed fabric is covered with long fluff, the ground structure is not easy to see, and it is difficult to judge the raw materials and yarn cushion after cashmere yarn is brushed, so it is difficult to analyze the process of this kind of fabric.

Through a long time of practice, the author summarizes some analysis methods of warp knitted China brushed fabric, which are introduced as follows.

Judgment of China brushed fabric

Types and production methods of China brushed fabric

China brushed fabric are formed in many ways, and they are very similar in organizational structure and appearance.

It is very important to correctly judge whether they are brushed products for selecting production models.

Therefore, a comprehensive understanding of the characteristics and formation methods of warp knitted cashmere products is helpful to judge the types of products.

China brushed fabric
Brushed Fabric

Brushed fabric

This kind of fabric is one of the main products of Trico warp knitting machine.

It is mostly produced on Trico warp knitting machines with machine numbers E28 and E32.

It is usually woven with 2 ~ 4 comb bars.

Usually, the velvet yarn is arranged on the front comb to make a long needle back traverse.

In the finishing, the pile yarn floating thread on the reverse surface of the fabric process is pulled into a circle or broken through the needle cloth of the wool drawing machine to form the pile effect.

Due to the strong longitudinal tension of the fabric during pile raising, the transverse shrinkage of the fabric is large.

Common varieties include loop velvet, strip velvet, suede, golden velvet, etc.

Sheared fabric

Pile shearing fabric is a kind of pile fabric which can cut China brushed fabric by pile shearing machine to obtain yarn breaking pile effect.

Warp knitted terry fabrics for shearing are generally produced on Trico machines equipped with Terry sinkers with machine numbers E24 and E28.

The fabric ground organization is usually formed by a back comb, which moves the needle back in the same direction and the same needle pitch with the terry sinker bed.

The needle back of the wool yarn comb bar moves away or in a different direction from the terry sinker, so the wool yarn will cross the terry sinker, A terry circle is formed on the edge of the sinker.

In this kind of sheared fabric, the velvet yarn is mainly chain weave, the ground yarn is two needle warp flat or three needle warp satin weave, and the terry sinker makes a transverse shift of needle pitch.

The terry fabric woven on a warp knitting towel machine or a double needle bed terry warp knitting machine with sheet needles can also be sheared.

In addition, the shrinkage of elastic silk can be used to loop the velvet yarn with long extension line on the reverse side of the fabric process, and then cut down, such as elastic velvet.

Compared with other warp knitted cashmere fabrics, sheared fabrics have the disadvantage of large cashmere yarn loss due to the need to cut off the loop head, so they are less used at present.


Table of Contents
    Add a header to begin generating the table of contents

    Share This Post

    On Key

    Newest Update